Skip to content
BLACK MONTH: Up to 60% off Shop now →
guide

How to Mount a Shoe Horn on the Wall Without Drilling

Walnut magnetic shoe horn hanging on a white wall. Text: On the wall. No drilling.

The most common problem with a shoe horn is not using it. It is finding it. A shoe horn that hangs on the wall by the door has a home, so it is there every time you put your shoes on.

The AESKA Magnetic Shoehorn comes with a small wall mount. The mount has an adhesive pad on the back, and the shoe horn attaches to it with a magnet. You need no drill, no screws and no tools.

Hand holding the wooden wall mount with built-in magnet

Where to put it

  • Close to where you put your shoes on. By the front door, next to the shoe rack or inside the wardrobe.
  • At a height you can reach comfortably while standing.
  • On a smooth, flat surface. Painted walls, tiles, wood and glass work best.

Avoid textured, dusty or damp surfaces. The adhesive needs full contact with the wall to hold.

Surfaces for the adhesive wall mount: painted walls, tiles, wood and glass work; avoid textured, dusty or damp surfaces

How to mount it, step by step

  1. Pick the spot. Hold the shoe horn against the wall first to check the height and that it hangs free.
  2. Clean the surface. Wipe away dust and grease, then let the wall dry completely.
  3. Peel off the backing from the adhesive pad.
  4. Press the mount firmly against the wall for about 30 seconds.
  5. Attach the shoe horn. It clicks onto the mount magnetically.

Five steps to mount a magnetic shoe horn without drilling: pick the spot, clean the wall, peel the backing, press for 30 seconds, attach the shoe horn

Peeling the adhesive backing off the wall mount, no drilling needed

The mount is made to stay where you put it, so choose the spot before you press it on.

Good for rented homes

Because nothing is drilled, there are no holes to fill when you move. If you need to take the mount down or move it, our help center explains how to remove the wall mount.

Using it day to day

Lift the shoe horn off the mount, use it, and put it back. The magnet pulls it into place, so it takes one second and one hand. If you have not used a long shoe horn before, here is how to use one standing up.

Caring for the wood

  • Wipe it with a soft, dry cloth to remove dust.
  • For marks, use a slightly damp cloth and dry the wood straight away.
  • Do not soak it, and avoid harsh cleaners and abrasive sponges.
  • Do not hang it right next to a radiator or another strong heat source.

How to care for a wooden shoe horn: wipe with a dry cloth, use a slightly damp cloth for marks, avoid soaking, harsh cleaners and strong heat

Wood is a natural material, so the grain and tone vary a little from piece to piece.

The shoe horn

The AESKA Magnetic Shoehorn is 53 cm (21 in) long, made of solid beechwood and comes in Dark Oak, Walnut, Light Oak and Black.

Three magnetic shoe horns in different wood finishes hanging on a white wall

Previous Post Next Post